Features: Large diameter (A) 80–180 mm, small diameter (B) 60–160°, height (L) 5–10 mm, number of colors: 6, printing area: 570×150 mm, machine speed: 8000 pcs/h, printing speed: 6000 pcs/h, main motor power: 3 kW, conveyor power: 0.1 kW, drive conveyor power: 0.2 kW, UV curing on axis, curing unit power: 2.5 kW, suction pump power: 1.5 kW, pump displacement: 3 m³/min, air pressure: 0.7 MPa, air consumption: 0.1 L/min, required power: 380 V – 50 Hz – three-phase, machine weight: approx. 8 tons. Printing group technical specs: • Drum cylinder: four-head, diameter 476 mm, steel, hard chrome plated • Cliché cylinder: diameter 119 mm, steel, hard chrome plated, with slotted plate • Plate pressure adjustment: by worm gear • Circular adjustment: approx. 2 mm radial • Lateral adjustment: approx. ±2 mm gap • Vertical plate: double-head, diameter 242 mm, steel, with fine pressure and coupling adjustment. • Ink units: 6 • • Forming cylinder: diameter 86 mm, rubber coated, 60° hardness. • Oscillating cylinder 1: diameter 65 mm, steel, coated • Middle cylinder 1: diameter 50 mm, rubber coated, 60° hardness. • Middle cylinder 2: diameter 45 mm, rubber coated, 60° hardness. • Oscillating cylinder 2: diameter 65 mm, steel, coated • Perforated cylinder: diameter 45 mm, rubber coated, 60° hardness. • Ink jet cylinder: diameter 50 mm, steel, hard chrome plated, gear driven. • Ink adjustment screw: by differential screw. • Forming cylinder pressure: pneumatic (compressed air). • Forming cylinder pressure adjustment: by cam. • Printing unit position adjustment: lateral, angular, with image adjustment. Accessories: 1- Surface treatment: The surface to be printed must be treated before printing, including a flame section. Treating the caps before printing improves surface tension. 2- Drying: UV lamp is installed on the conveyor, which increases print fixation immediately after printing. Also equipped with a lamp cover closing system. The cover closes when the machine is ready, stops...